25mm (1" inch) Hubcentric 4x100 Wheel Spacers (54.1 Hub) for Toyota Mazda Scion

Description

Powered by
Frooition
Item Description
CNC Machined Hubcentric Wheel Spacers with Lip
Hubcentric Design -  Makes the wheel spacer act as a precise extension of the axle hub which guarantees a perfect fit.
Includes pre-installed wheel studs and lug nuts necessary to complete the installation.
Widens the track for improved handling and improved safety.
Completes the "flush" look by eliminating wheel & fender gap.
Increased Inner Clearance - Allows you to install larger tires, wider wheels, and/or big brake kits.
SPECIFICATIONS
Quantity
Two (2) Spacers (8 Lug Nuts Included)
Thickness Per Spacer
1.0" (25mm)
Centerbore
54.1mm
Bolt Pattern
4x100
Material
T6 Aerospace Grade Aluminum
Stud/Nut Thread Size
12x1.5
Stud Grade
Metric Grade 10.9
FITMENT INFORMATION
1991-1994 Mazda 323
1989-2005 Mazda Miata
1992-1995 Mazda MX-3
1991-1998 Mazda Protege
2004-2007 Scion xA
2004-2007 Scion xB
1986-1991 Toyota Celica (Does not fit GTS Models)
1988-2002 Toyota Corolla
2000-2005 Toyota Echo
1985-1989 Toyota MR2
2000-2005 Toyota MR2 Spyder
1992-1999 Toyota Paseo
2001-2003 Toyota Prius
1989-2002 Toyota Tercel
2007-2011 Toyota Yaris
MANUFACTURING & DESIGN
Raw Materials
Constructed using aerospace grade aluminum, our raw materials are carefully curated and all of which undergoes a stringent inbound quality control process.
Perfectly Hubcentric
Designed to fit perfectly over your wheel hub, virtually eliminating the possibility of high speed vibrations. Wheel spacers also feature a hubcentric lip to help your wheel center properly.
CNC Machined
Our manufacturing facility utilizes the newest, state-of-the-art machinery. Spacers are crafted to exacting specifications and meticulously checked prior to leaving the facility.
Universal VS Hubcentric with Lip
Hubcentric spacers are designed to fit snugly over your vehicle's center hub, allowing your wheel/tire to center properly, preventing vibrations and premature wear of wheel/tire components. This also gives improved safety over universal spacers by reducing the chance of lug nut/bolts sheering off during events such as driving through a deep pothole or wheels making a hard impact against objects such as curbs and other road hazards.
Non-hubcentric Spacer
Will not properly center around your vehicle's hub. This causes it to rotate unevenly during driving, which is one of the main causes for steering wheel vibrations
Hubcentric Spacer with Lip
The
54.1mm
centerbore of these spacers will properly center around your vehicle's hub.  In addition, the
54.1mm diameter lip allows you to center your wheel.
Other Sizes Offered
Bolt Pattern
Thickness
Stud/Nut Thread
eBay Link
4x100
20mm
12x1.5
331286919304
4x100
25mm (1")
12x1.5
380972446041
(Click Corresponding tab below for Fitment & Shipping Information)
Important Notes
Important Notes
Legal Disclaimer
Important Notes
Important Safety Advisory
As with any component you purchase for your vehicle, installation should be done by a qualified technician. We've provided the following information as a general reference for purchasing and installing these spacers/adapters. The following list isn't all-inclusive and may be different depending on the vehicle you drive, type of wheels you have, and ideal setup you're trying to achieve. Failure to install properly may cause your lug nuts/wheel studs/spacers to loosen or break while driving. If you are not confident or familiar with the installation, please ask a trained professional for help.
Before Purchasing
- Measure your wheel gap for clearance. You will need at least 1.0" (25mm) of clearance to prevent the wheel/tire from hitting the fender or fenderliner.
- The vehicle’s wheel studs need to be measured. If the studs are longer than 1.0" (25mm), it will extend past the spacer's surface.  It may not be possible to bolt the wheel safely onto the spacer, depending on whether your wheels have pockets/cavities around the mounting pad.
- If your vehicle does not have 12x1.5 threaded wheel studs, you would need to purchase the correct threaded lug nuts for proper installation.
Before Installation
Check compatibility of spacer-to-hub, spacer-to-wheel, and lug nuts (thread pitch & seat type)
During Installation
- Installation should be performed by a trained professional using proper tools.
- Avoid using an impact wrench or any pneumatic tools; improper usage may cause damage to components.
- Ensure proper thread engagement. Typically, its a minimum of 5-8 turns before the lug nut tightens, however, it varies depending on thread pitch and type of vehicle.
- ALL Lug Nuts (on the spacers and the wheels) MUST be torqued to manufacture specifications.
After Installation
- Test drive your vehicle to ensure the hardware is installed properly. Pay close attention for any noises, vibrations, or compatibility issues (such as fender rubbing).
- Inspect and re-torque ALL lug nuts after 25-50 miles of driving. This requires you to take off the wheels to tighten the lug nuts holding the spacers to your vehicle.
Note: No returns or exchanges once product has been installed on the vehicle.
Legal Information
Legal Information
Note: This is an aftermarket component. The trademarks used in this listing are registered trademarks of their respective owners, and are used only to identify the vehicles to which this part fits.
More Items!
View more great items
3mm Hubcentric Race Wheel Spacers for Lexus & Toyota | 5x114.3 | 60.1mm 60mm Hub
&dollar13.06
5mm Hubcentric 5x100 Wheel Spacers For Scion FRS FR-S Subaru BRZ Impreza WRX STI
&dollar10.25
2pc 2.0" 6x139.7 (6Lug) Black Wheel Spacers | 14x1.5 Studs | Chevy & GMC Trucks
&dollar49.99
4pc 1" Thick | 5x115 Wheel Spacers with Lip | Hubcentric 70.3 Hub | 12x1.5 Studs
&dollar94.57
Powered by
Frooition
Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.